Allied Telesis AT-9000 Series - Manual (Page 183)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
183
Figure 63. TACACS+ Server Add Page
2. Enter the following settings:
 IP Address— Enter the IP address of the TACACS+ server. The IP
address must be in the following IPv4 format: xxx.xxx.xxx.xxx.
 Key— Enter the encryption key for TACACS+ communications
between the switch and TACACS+ server. The key must match the
encryption key used by the TACACS+ server. The maximum
length is 40 characters. Special characters are allowed, but spaces
are not permitted.
3. Click Apply.
4. Click SAVE.