Allied Telesis AT-9000 Series - Manual (Page 119)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
119
6. Select the Member Ports by clicking the box next to the port.
A green check mark indicates a port has been selected.
Note
Allied Telesis does not recommend using twisted pair ports 25R to
28R on the AT-9000/28 and AT-9000/28SP Managed Layer 2
ecoSwitches in static port trunks. The performance of a static port
trunk that has these ports may not be predictable if the ports
transition to the redundant state.
7. Enter the Trunk ID.
This name must be the lowest port number. After you create the static
trunk, the software appends this port number with “sa.” For example,
the trunk ID of “sa5” indicates a trunk with port 5 as the lowest port
number in the trunk.
8. Click Add.
A confirmation message is displayed.
9. Click SAVE.