Allied Telesis AT-9000 Series - Manual (Page 202)

Chapter 18: Setting IPv4 and IPv6 Management
202
Caution
When you use the web interface to assign an IPv4 address to the
switch using DHCP, you lose connection with the switch. To
maintain your connection with the switch, make sure you have a
local connection to the switch when you assign a DHCP IP address.
To assign a DHCP IPv4 address, do the following:
1. Hover the cursor over the Management tab.
The Management tab is displayed. See Figure 69 on page 200.
2. From the Management tab drop-down menu, select IP.
3. Click the box next to the DHCP Address field.
The IP Management Configuration page with the DHCP IP Address
selected is displayed. See Figure 71.
Figure 71. IP Management Configuration Page with DHCP
4. To select a VLAN, use the pull-down menu next to the Interface Name
field.
You can only select a VLAN that you have configured previously. For
information about how to assign a VLAN, see Chapter 11, “Setting
Port-based and Tagged VLANs” on page 125.