Allied Telesis AT-9000 Series - Manual (Page 175)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
175
Configuring RADIUS for Remote Manager Authentication
To configure remote manager authentication using RADIUS and add
RADIUS servers to the switch, perform the following:
 “Configuring Remote Manager Authentication Using RADIUS”
 “Adding a RADIUS Server” on page 177
Configuring
Remote Manager
Authentication
Using RADIUS
To configure the RADIUS server, do the following:
1. Hover the cursor over the Security tab.
The Security tab is displayed. See Figure 57 on page 166.
2. From the Security tab drop-down menu, select Authentication
Servers.
The Authentication Server Configuration page with the RADIUS tab
selected is displayed. See Figure 60.
Figure 60. Authentication Server Configuration Page with RADIUS Tab
3. Change the following fields as needed:
 Timeout Value— Enter the length of the time, in seconds, that the