Allied Telesis AT-9000 Series - Manual (Page 113)

113
Chapter 10
Setting Static Port Trunks
Static port trunks are groups of two to eight ports that act as single virtual
links between the switch and other network devices. This chapter
describes how to display, create, and modify static trunks. See the
following sections:
 “Overview” on page 114
 “Displaying Static Trunk Settings” on page 115
 “Adding Static Trunks” on page 117
 “Modifying the Static Trunk Settings” on page 120
 “Deleting Static Trunks” on page 123
For additional guidelines and information regarding static port trunks, see
the following chapters in the AlliedWare Plus Management Software
Command Line Interface User’s Guide:
 Static Port Trunks
 Static Port Trunk Commands