Allied Telesis AT-9000 Series - Manual (Page 106)

Chapter 9: Setting LACP
106
For instance, an aggregator of ports 12,16 and 17 must be assigned
the ID number 12 because that is the base port.
 Load Balance Method— Load distribution methods of the
aggregators. An aggregator can have only one load distribution
method. The load distribution method determines the manner in which
the switch distributes the egress packets among the active ports of an
aggregator. The packets can be distributed by source MAC or IP
address, destination MAC or IP address, or by both source and
destination addresses.
 Member Port(s)— Member ports of the aggregators.