Allied Telesis AT-9000 Series - Manual (Page 103)

103
Chapter 9
Setting LACP
The Link Aggregation Control Protocol (LACP) is used to increase the
bandwidth between the switch and other LACP compatible devices by
grouping ports together to form single virtual links.
This chapter provides a brief description of LACP and explains how to
display and set LACP. See the following sections:
 “Overview” on page 104
 “Displaying LACP Trunks” on page 105
 “Adding an LACP Trunk” on page 107
 “Modifying an LACP Trunk” on page 109
 “Deleting an LACP Trunk” on page 111
For more information about LACP trunks, see the following chapters in the
AlliedWare Plus Management Software Command Line Interface User’s
Guide:
 Link Aggregation Control Protocol (LACP)
 LACP Commands