Allied Telesis AT-9000 Series - Manual (Page 177)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
177
 AAA Accounting— Select a RADIUS accounting setting. Choose
from the following:
Start-Stop: A start accounting message is sent at the
beginning of a session, and a stop accounting message is sent
at the end of the session.
Stop-Only: A stop accounting message is sent at the end of
the session.
None: Sending accounting messages is disabled.
4. Click Apply.
The Active Authentication Server field shown on the upper middle of
the page indicates “RADIUS.”
5. Click SAVE.
Adding a
RADIUS Server
To add a RADIUS server, do the following:
1. Click Add near the RADIUS server list.
The RADIUS Server Add page is displayed. See Figure 61.
Figure 61. Radius Server Add Page