Allied Telesis AT-9000 Series - Manual (Page 188)

Chapter 17: Setting 802.1x Port-based Network Access
188
Configuring 802.1x Port-based Authentication
To configure 802.1x port authentication on a port, do the following:
1. Hover the cursor over the Security tab.
The Security tab is displayed. See Figure 57 on page 166.
2. From the Security tab drop-down menu, select 802.1x Port
Authentication.
The 802.1x Authentication page is displayed. See Figure 64 on page
187.
3. Click Edit next to the port that you want to modify.
The Modify 802.1x Authentication page is displayed. See Figure 65.
Figure 65. Modify 802.1x Authentication Page
4. Use the pull-down menu next to the Port Role field to select
Authenticator.
The Modify 802.1x Authentication page expands to display the
Authenticator parameters. See Figure 66 on page 189.