Allied Telesis AT-9000 Series - Manual (Page 143)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
143
Disabling IGMP Snooping
To disable the IGMP Configuration on the switch, do the following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 20 on page 59.
2. From the Switching tab drop-down menu, select IGMP.
The IGMP Snooping page is displayed with the Configuration tab
selected by default. See Figure 51 on page 139.
3. Use the pull-down menu next to the Status field to select “Disabled.”
When you disable IGMP snooping, the switch floods the multicast
packets on all of the ports except those that receive the packets.
4. Click Apply.
5. Click SAVE.