Allied Telesis AT-9000 Series - Manual (Page 34)

Chapter 3: Basic Switch Parameters
34
4. There are two ways to set the date and time manually. Use either
Step 4 or Step 5. To type in the system date and time in the Date &
Time field, do the following:
a. Enter the time and date in the following format:
yyyy-dd-mm hh:mm:ss
b. Click Apply.
5. Select the calendar icon.
The Calendar page is displayed. See Figure 8.
Figure 8. Calendar Page
a. Use the arrows at the top of the Calendar to select the month and
year.
b. Click on the day of the month.
c. Set the time of day using the following format:
hh:mm:ss
d. Close the Calendar page.
6. Click Apply.
7. Click SAVE to save your changes on the switch.
Setting an SNTP
or NTP Server
To configure an SNTP or NTP server, do the following:
1. Hover the cursor over the System tab.
The System Settings Tab is displayed. See Figure 6 on page 33.
2. From the System tab, hover over System Settings.
3. Move the cursor to the right and select Time.