Allied Telesis AT-9000 Series - Manual (Page 215)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
215
You must define the ID and Country fields. The remaining fields are
optional.
The fields are listed in Step 4. Each field can contain up to 255
characters.
Note
The ID number indicates the civic location. The Country field must
contain two uppercase characters, for example, “US.”
7. Click Apply.
8. Click SAVE.
Creating a
Coordinate
Location
To create an LLDP Coordinate Location, do the following:
1. Hover the cursor over the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 73 on page
211.
2. From the Discovery & Monitoring tab, hover over LLDP.
The LLDP tab appears on the right.
3. From the LLDP tab, move the cursor to the right and hover over
Locations.
The Locations tab is displayed. See Figure 74 on page 212.
4. From the Locations tab drop-down menu, move the cursor to the right
and select Coordinates.
The LLDP Coordinate Location page is displayed. See Figure 77.
Figure 77. LLDP Coordinate Location Page
5. From the LLDP Coordinate Location page, click Add.