Allied Telesis AT-9000 Series - Manual (Page 69)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
69
5. Change the following fields as needed:
 Interface— Indicates the port number. You cannot change this
field.
 Broadcast— Specifies Broadcast packets are received by the
port: “ON”, or not received by the port: “OFF”. By default,
Broadcast packets are not received by a port.
 Broadcast Level— Maximum number of ingress packets per
second of broadcast packets the port will forward. The range is 0 to
33,554,431 packets. The default is 33,554,431 packets.
 Multicast— Specifies multicast packets are “ON” or “OFF” on the
port. By default, this field is set to “OFF” which indicates multicast
packets are not received by a port.
 Multicast Level— Maximum number of ingress packets per
second of multicast packets the port forwards. The range is 0 to
33,554,431 packets. The default is 33,554,431 packets.
 DLF— Specifies unknown unicast packets are “ON” or “OFF” on
the port. By default, the setting is “ON” indicating that unknown
unicast packets are received by a port.
 DLF Level— Maximum number of ingress packets per second of
unknown unicast packets the port forwards. The range is 0 to
33,554,431 packets. The default is 33,554,431 packets.
6. Click Apply.
7. Click SAVE.