Allied Telesis AT-9000 Series - Manual (Page 247)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
247
Disabling LLDP on the Switch
To disable the LLDP feature on a switch, do the following:
1. Hover the cursor over the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 73 on page
211.
2. From the Discovery & Monitoring tab, hover over LLDP.
The LLDP tab appears to the right.
3. From the LLDP tab, select Basic Configuration.
The LLDP Configuration page is displayed. See Figure 81 on page
219.
4. Use the pull-down menu next to the Status field to select Disabled.
5. Click Apply.
6. Click SAVE.