Allied Telesis AT-9000 Series - Manual (Page 168)

Chapter 15: Setting MAC Address-based Port Security
168
Modifying MAC Address-based Port Security Settings
To the modify the MAC address-based port security settings, do the
following:
1. Hover the cursor over the Security tab.
The Security tab is displayed. See Figure 57 on page 166.
2. From the Security tab drop-down menu, select MAC Based Security.
The MAC Based Port Security page is displayed. See Figure 58 on
page 166.
3. Click Edit next to the port that you want to modify.
The Modify MAC Based Port Security page is displayed. See
Figure 59.
Figure 59. Modify MAC Based Port Security Page