Allied Telesis AT-9000 Series - Manual (Page 145)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
145
Displaying the Hosts List
To display the IGMP Hosts List, do the following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 20 on page 59.
2. From the Switching tab drop-down menu, select IGMP.
The IGMP Snooping page is displayed with the Configuration tab
selected by default. See Figure 51 on page 139.
3. Click the Hosts List tab.
The Hosts List page is displayed. See Figure 53.
Figure 53. IGMP Snooping Page with Hosts List Tab
The following settings are displayed:
 Group Address— Multicast addresses of the groups.
 VLAN ID— VLAN ID of the host nodes.
 Port ID— Ports of the host nodes. If the host nodes are on port
trunks, this field displays the trunk ID numbers, instead of the port
numbers.
 Host IP— IP addresses of the host nodes.