Allied Telesis AT-9000 Series - Manual (Page 111)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
111
Deleting an LACP Trunk
To delete an LACP trunk, do the following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 20 on page 59.
2. From the Switching tab, hover over Link Aggregation.
For an example of the Link Aggregation selection, see Figure 38 on
page 105.
3. Move the cursor to the right and select LACP.
The LACP Trunks page is displayed. See Figure 39 on page 105.
4. From the LACP Trunks page, click Delete next to the Aggregator ID
that you want to delete.
5. Click SAVE.