Allied Telesis AT-9000 Series - Manual (Page 245)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
245
Displaying
LLDP-MED TLV
To display LLDP-MED TLV settings, do the following:
1. Hover the cursor over the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 73 on page
211.
2. From the Discovery & Monitoring tab, hover over LLDP and then
hover over TLV.
The LLDP TLV tab is displayed. See Figure 86 on page 225.
3. From the LLDP TLV tab, move the cursor to the right and select TLV-
MED.
The LLDP Med TLV page is displayed. See Figure 89 on page 228.
The following fields are displayed:
 Interface— Port number.
 Capabilities— Device’s router and bridge functions, and whether
or not these functions are currently enabled.
 Network-policy— Network policy information configured on the
port for connected media endpoint devices. The switch supports
Application Type 1: Voice, including the following network policy for
connected voice devices to use for voice data:
- Voice VLAN ID
- Voice VLAN Class of Service (CoS) priority
- Voice VLAN Diffserv Code Point (DSCP)
 Location— Location information configured for the port, in one or
more of the following formats:
- Civic location
- Coordinate location
- Emergency Location Identification Number (ELIN)