Allied Telesis AT-9000 Series - Manual (Page 50)

Chapter 3: Basic Switch Parameters
50
Upgrading the Software
You can obtain the latest version of the AlliedWare Plus software from the
Allied Telesis web site. You must have access to a TFTP server from your
PC to upgrade the AlliedWare Plus software on your switch. Allied Telesis
does not include this application with the software. The upgrade process
takes approximately three minutes.
Upgrading the system software on the switch ends your current web
browser management session. To continue managing the switch, you
must log in again.
Note
All unsaved changes are discarded when you upgrade the software
on a switch. To save your changes, click SAVE.
To upgrade the AlliedWare Plus software, perform the following
procedure:
1. Open your TFTP server software and provide it with the IP address of
your PC.
2. Hover the cursor over the System Tab.
The System Settings Tab is displayed. See Figure 6 on page 33.
3. From the drop-down menu, select Dashboard.
The Dashboard Page is displayed. See Figure 4 on page 23.
4. Click System Upgrade at the bottom of the page.
The System Upgrade page is displayed. See Figure 18 on page 51.