Allied Telesis AT-9000 Series - Manual (Page 243)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
243
 Med Notification— Indicates whether the switch sends LLDP-
MED topology change notifications when devices are connected
to, or disconnected from, the specified ports.
Displaying Port
Locations
To display the LLDP port locations, do the following:
1. Hover the cursor over the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 73 on page
211.
2. From the Discovery & Monitoring tab, hover over LLDP.
The LLDP tab appears on the right.
3. From the LLDP tab, move the cursor to the right and select Port
Locations.
The LLDP Port Location page is displayed. See Figure 84 on page
223.
The following fields are displayed.
 Interface— Port number.
 Civic Location ID— Civic location information for the port.
 Coordinate Location ID— LLDP-MED coordinate information for
the port.
 ELIN Location ID— ELIN location information for the port.
Displaying LLDP
TLV
To display the LLDP TLV settings, do the following:
1. Hover the cursor over the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 73 on page
211.
2. From the Discovery & Monitoring tab, hover over LLDP.
The LLDP tab is displayed.
3. From the LLDP tab, hover over TLV.
The LLDP TLV tab is displayed in Figure 86 on page 225.