Allied Telesis AT-9000 Series - Manual (Page 184)

Chapter 16: Setting RADIUS and TACACS+ Clients
184
Deleting an Authentication Server
To delete either an TACACS+ or RADIUS authentication server, do the
following:
1. Hover the cursor over the Security tab.
The Security tab is displayed. See Figure 57 on page 166.
2. From the Security tab drop-down menu, select Authentication
Servers.
The Authentication Server Configuration page is displayed. See Figure
60 on page 175.
3. Click either the TACACS+ or the RADIUS tab, depending on the type
of server you want to delete.
4. Click Delete next to the server that you want to delete.
5. Click SAVE.