Allied Telesis AT-9000 Series - Manual (Page 169)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
169
4. Change the following settings as needed:
 Interface— Indicates the port number.
 MAC Security— Activates or deactivates MAC address-based
security on ports. Choose either “Enabled” or “Disabled.”
 Aging— Selects if the ports that can or cannot add the source
MAC addresses as dynamic MAC address in the MAC address
table. Ports that learn their maximum numbers of addresses can
learn new addresses as inactive addresses are deleted from the
table. Choose from the following options:
Yes Indicates a port that can add source MAC
addresses as dynamic.
No Indicates a port that cannot add source MAC
addresses as dynamic.
 MAX MACs— Maximum number of dynamic MAC addresses the
port is permitted to learn. The range is 0 to 255.
 Violation Action— Selects the intrusion action of the port. Choose
from the following:
Protect Protects intrusion action.This is the default
setting. Ports discard those frames that have
unknown MAC addresses.
Restrict Restricts intrusion action. Sends SNMP traps
when the ports discard frames.
Shut Down Shuts down intrusion action. Disables the
ports and sends SNMP traps.
5. Click Apply.
6. Click SAVE.