Allied Telesis AT-9000 Series - Manual (Page 68)

Chapter 4: Setting Port Parameters
68
Modifying the Storm Control Settings
To modify the storm control settings, do the following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 20 on page 59.
2. From the Switching tab, hover over Port.
The Port tab expands to the right.
3. From the Port tab, move the cursor to the right and select Storm
Control.
The Storm Control List page is displayed. See Figure 23 on page 66.
4. Click Edit on the port that you want to modify.
The Storm Control Settings page is displayed. See Figure 24.
Figure 24. Storm Control Settings Page