Allied Telesis AT-9000 Series - Manual (Page 45)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
45
3. Enter a name in the User Name field.
This field specifies the log-on name for the new account. The name is
case-sensitive and can contain up to fifteen alphanumeric characters.
Spaces and special characters are not allowed.
4. Enter a password in the Password field.
This specifies the password for the new management account. You
can enter the password in plaintext. A plaintext password can consist
of up to 16 alphanumeric characters and is case-sensitive. Spaces and
special characters are not allowed.
5. Use the pull-down menu in the Privilege field to select a user privilege
level. Choose from the following:
 Level 15: Management accounts with a user level of 15 have
unrestricted access to the software. This is the default setting.
 Level 1: Management accounts with a user level of 1 have
restricted access to the software.
6. Click Add User.
7. Click SAVE.
Changing a User
Password
To change a user password, do the following:
1. From the home page, hover the cursor over the System tab.
The System Settings Tab is displayed. See Figure 6 on page 33.
2. From the System Settings tab, select User Management.
The User Management page is displayed. See Figure 14 on page 44.
3. From the User Management page, select the Change Password tab.
The User Management page with the Change Password tab is
displayed. See Figure 15 on page 46.