Allied Telesis AT-9000 Series - Manual (Page 139)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
139
Displaying and Modifying IGMP Snooping Configuration
To display and modify the IGMP Configuration settings, do the following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 20 on page 59.
2. From the Switching tab drop-down menu, select IGMP.
The IGMP Snooping page is displayed. By default, the Configuration
tab is selected. See Figure 51.
Figure 51. IGMP Snooping Page with Configuration Tab
3. Change the following settings as needed:
 Status— Specifies if IGMP Snooping is active or inactive. Select
“Enabled” to activate IGMP or “Disabled” to make this feature
inactive. When you enable IGMP, the switch begins to build its
multicast tables as queries from the multicast router and reports
from the host nodes arrive on its ports. When you disable IGMP,
the switch floods the multicast packets on all of the ports except
those that receive the packets.