Allied Telesis AT-9000 Series - Manual (Page 256)

Chapter 20: Setting sFlow
256
Enabling sFlow on the Switch
To enable the sFlow feature on a switch, do the following:
1. Hover the cursor over the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 73 on page
211.
2. From the Discovery & Monitoring tab drop-down menu, select
sFlow.
The sFlow page is displayed with the Port Configurations tab selected.
See Figure 98.
Figure 98. sFlow Page with Port Configurations Tab
3. Use the pull-down menu next to the Status field to select Enabled.
4. Click Apply.
5. Click SAVE.