Allied Telesis AT-9000 Series - Manual (Page 116)

Chapter 10: Setting Static Port Trunks
116
Figure 44. Static Trunks Page
The following fields are displayed:
 Trunk ID— Indicates the ID of the static trunk. This name must be
the lowest port number appended with “sa.” For example, the trunk
ID of “sa5” indicates a trunk with port 5 as the lowest port number
in the trunk.
 Load Balance Method— Indicates one of the following:
Src MAC— Source MAC address is the load distribution
method. This is a Layer 2 load balance method.
Dst MAC— Destination MAC address is the load distribution
method. This is a Layer 2 load balance method.
Src-Dst MAC— Source address/destination MAC address is
the load distribution method. This is a Layer 2 load balance
method.
Src IP — Source IP address is the load distribution method.
This is a Layer 3 load balance method.
Dst IP — Destination IP address is the load distribution
method. This is a Layer 3 load balance method.
Src-Dst IP — Source address/destination IP address is the
load distribution method. This is a Layer 3 load balance
method.
 Port List— List of ports that are members of the static trunk.