Allied Telesis AT-9000 Series - Manual (Page 61)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
61
 Flow Control— Indicates if flow control (send and receive) is
enabled or disabled on a port. When flow control is enabled, a port
sends pause packets when it reaches the point of packet
congestion. Also, the port stops transmitting packets when it
receives pause packets from its local or remote counterpart. When
flow control is disabled, the port sends pause packets regardless of
packet congestion. In addition the port continues transmitting
packets when it receives pause packets from its local or remote
counterpart. The default is “Disabled.”
 Flow Control Limit— Indicates the threshold level for flow control
on a port. The default value is 7935.