Allied Telesis AT-9000 Series - Manual (Page 170)

Chapter 15: Setting MAC Address-based Port Security
170
Disabling MAC Address-based Port Security Settings
To deactivate MAC address-based port security settings, do the following:
1. Hover the cursor over the Security tab.
The Security tab is displayed. See Figure 57 on page 166.
2. From the Security tab drop-down menu, select MAC Based Security.
The MAC Based Port Security page is displayed. See Figure 58 on
page 166.
3. Click Edit next to the port that you want to remove.
The Modify MAC Based Port Security page is displayed. See Figure
59 on page 168.
4. Use the pull-down menu next to the MAC Security field and select
“Disabled.”
5. Click Apply.
6. Click SAVE.