Allied Telesis AT-9000 Series - Manual (Page 123)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
123
Deleting Static Trunks
To delete a static port trunk, do the following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 20 on page 59.
2. From the Switching tab, hover over Link Aggregation.
For an example of the Link Aggregation selection, see Figure 42 on
page 115.
3. Move the cursor to the right and select Static Trunks.
The Static Trunks page is displayed. See Figure 44 on page 116.
4. From the Static Trunks page, click Delete next to the Trunk ID that you
want to delete.
5. Click SAVE.