Allied Telesis AT-9000 Series - Manual (Page 195)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
195
Disabling 802.1x Port-based Authentication on the Switch
To disable the 802.1x port-based Authentication feature on a switch, do
the following:
1. Hover the cursor over the Security tab.
The Security tab is displayed. See Figure 57 on page 166.
2. From the Security tab drop-down menu, select 802.1x Port
Authentication.
The 802.1x Authentication page with the Status field set to Enabled is
displayed. See Figure 68.
Figure 68. 802.1x Authentication Page with Status Enabled
3. Use the pull-down menu next to the Status field to select Disabled.
4. Click Apply.
5. Click SAVE.