Allied Telesis AT-9000 Series User Manual
Page 191
AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
191
exchange with a client. The range is 1
to 65,535 seconds. The default value is
60 seconds.
Tx-period
Sets the number of seconds an
authenticator port waits for a response
to an EAP-request/identity frame from
a client before retransmitting the
request. The default value is 30
seconds. The range is 1 to 65,535
seconds.
Reauth-period
Specifies the time interval that an
authenticator port requires a client to
reauthenticate. The range is 1 to
65,535 seconds. The default value is
3600 seconds.
Supplicant-timeout Sets the timer used by the switch to
determine authentication server
timeout conditions. The range is 1 to
65,535 seconds. The default value is
30 seconds.
Server-timeout
Sets the timer used by the switch to
determine authentication server
timeout conditions. The range is 1 to
65,535 seconds. The default value is
30 seconds.
Re-authentication— Activates reauthentication on the
authenticator port. The client must periodically reauthenticate
according to the time interval set with the Reauth-period timer.
Click the box to activate this field.
Number of Re-auth Requests— Specifies the maximum number
of times the switch retransmits EAP Request packets to a client
before it times out an authentication session. The range is 1 to 10
retransmissions. The default value is 2.
Port Control Direction— Specifies whether authenticator ports
that are in the unauthorized state should forward egress broadcast
and multicast traffic. Choose from the following:
In
Specifies that authenticator ports in the
unauthorized state should forward egress
broadcast and multicast traffic, and discard the
ingress broadcast and multicast traffic. This is
the default setting.