Allied Telesis AT-9000 Series - Manual (Page 221)

AlliedWare Plus Version 2.1.8 Management Software Web Interface User’s Guide
221
2. From the Discovery & Monitoring tab, hover over LLDP and then
select Port Configurations on the right.
The LLDP Port Config page is displayed. See Figure 82.
Figure 82. LLDP Port Config Page
The following fields are displayed:
 Interface— Port number.
 Notification— The switch sends LLDP-MED topology change
notifications when devices are connected to, or disconnected from,
the specified ports. By default, this field is not selected.
 Adv. Transmit— The port sends LLDP advertisements. Ports
configured to transmit LLDP advertisements send the mandatory
TLVs and any optional LLDP TLVs they have been configured to
send. By default, this field is selected.
 Adv. Receive— The port accepts LLDP advertisements. Ports
configured to receive LLDP advertisements accept all
advertisements from their neighbors. By default, this field is
selected.
 Med Notifications— The switch sends LLDP-MED topology
change notifications when devices are connected to, or
disconnected from, the specified ports. By default, this field is not
selected.
3. Select Edit next to the port that you want to modify.