Allied Telesis AT-9000 Series - Manual (Page 252)

Chapter 20: Setting sFlow
252
Configuring sFlow on a Port
To configure the sFlow feature on a port, do the following:
1. Hover the cursor over the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 73 on page
211.
2. From the Discovery & Monitoring tab drop-down menu, select
sFlow.
The sFlow page is displayed with the Port Configurations tab selected.
See Figure 98 on page 256.
3. Click Edit next to the port that you want to modify.
The sFlow Port Modify page is displayed. See Figure 95.
Figure 95. sFlow Port Modify Page