Menus – HP StoreEver ESL G3 Tape Libraries User Manual
Page 81
interact with it. The others only display information. See
“Reading the library information
•
The Overall System Status buttons provide current status information for the six subsystems of
the physical library: Drives, Connectivity, Control, Robotics, Power, and Cooling. See
See
“Viewing details about events” (page 87)
to interpret information provided from clicking
the Robotics button in the Overall System Status section.
Figure 10 Viewing the LMC (physical library view shown)
Menus
The following seven LMC menus organize commands into logical groupings:
•
The Operations menu consists of commands that enable you to change the library mode of
operation (online or offline), import and export cartridges, load and unload drives, move
media, lock or unlock the I/E stations, perform an inventory, shut down the system, and log
off.
•
The Monitor menu consists of commands that enable you to obtain status information about
various aspects of the library, including system, drives, I/E stations, storage slots, media,
sensors, the email configuration, users, partitions, and key management information if you
are using ESKM.
•
The Setup menu consists of commands that enable you access the Setup Wizard and to set
up and configure various aspects of the library from other menu choices, including partitions,
secure manager, drive settings, the network configuration, physical library, users, notifications,
Accessing the Library Management Console (LMC)
81