HP StoreEver ESL G3 Tape Libraries User Manual
Page 158
4.
Click the Text tab.
5.
To save the information that the test generates, click Send.
If you are using the remote LMC client, you can choose to save the log to your hard drive. If
you choose to save directly to your hard drive, the report listing and test log are combined
into one text file.
A test log provides the following information:
•
The test output is from the library alignment test.
•
The test title is always shown between rows of equal signs.
•
A brief guide for understanding coordinates and offsets used in the test results is provided
near the beginning of the log.
•
The X-axis and Y-axis limits applied by this test are shown. MARGINAL output is placed
between parentheses, and FAILED output is placed between brackets; for example, (30) and
[45].
•
The results of the sub-test appear between dashed lines.
•
Coordinates are represented as A (aisle), F (frame), R (rack), S (section), C (column), and R
(row).
•
All location values are in 0.1 mm.
•
All results that you should review are identified with four arrows (>>>>) in the column to the
left of the detailed results.
•
At the end of every test, summary results of every sub-test are given. The overall test result
appears between asterisk lines, and a summary of sub-test results follows.
shows an example of a test log.
158
Maintaining the library