HP StoreEver ESL G3 Tape Libraries - Manual (Page 251)

show library status
Description of Command Function
Displays the current library state and status of each component.
This command will indicate whether the library is online, offline, or inventorying. It will also display
whether each drive is loaded or not.
Command Syntax
show library status
path: /show/library/status
Command Parameters (Required)
None.
Command Options
None.
Example
/>show library status
Component Status Description
------------------------ ------- ------------------------------------------------------------
System Health Red Failed
Control Orange Degraded; Active events: 1
Event: 20 Orange Library System firmware(Management Control Blade(MCB) firmware) has rebooted
Connectivity Red Failed; Active events: 1
Event: 17 Red Ethernet Expansion (EEB) circuit card at [1,1,1,1,8](EEB ethernet interface)
has failed
Power Green Operational
Cooling Green Operational
Robotics Green Operational
Robotics Green Operational
Robot Green Online Active
Drives Yellow Warning; Active events: 2
Event: 1 Yellow Control of Tape Drive at [1,1,1,1,1,1] communication has failed
Event: 19 Yellow Control of Tape Drive at [1,1,1,1,1,1] communication has failed
Drive# 1 (P1 D1) Yellow Online; Drive Empty
Media Loads: 0 - Read Errors: 0 - Write Errors: 0
Read: 0MB - Written: 0MB
Drive# 2 (P1 D2) Green Online; Drive Empty
Media Loads: 0 - Read Errors: 0 - Write Errors: 0
Read: 0MB - Written: 0MB
Drive# 3 (P1 D3) Green Online; Drive Empty
Media Loads: 0 - Read Errors: 0 - Write Errors: 0
Read: 0MB - Written: 0MB
Command Details 251