HP StoreEver ESL G3 Tape Libraries - Manual (Page 44)

Table 5 IPv4 Network Configuration Information (continued)
Description Element
In the Port Settings area:
Select Enable to have the library automatically negotiate
port speeds. Enable makes the Speed options Auto Negotiate
unavailable. Select Disable to make the Speed options
available for you to manually set the port speed.
The port speed (10 Mbps or 100 Mbps). Speed options
are available only if Auto Negotiate is disabled. Speed
The Cycle button enables you to cycle the external Ethernet interface without rebooting the
library.
2. Make the appropriate network configuration changes, and then click OK.
A message appears that informs you that network connectivity will be lost temporarily, and
asks whether you want to proceed.
3. Click Yes.
Setting up IPv6 network configuration
After completing steps 1 through 3 of “Setting up the network configuration” (page 47) , the Static
IP tab of the IPv6 Network Configuration dialog box appears:
1. Use the Static IP tab to disable or to enable and specify a static IP address. Valid static IP
addresses include link local, site local, and global unchaste.
2. Click DHCP to display the DHCP tab.
3. As prompted, use the DHCP tab to enable or disable the Dynamic Host Configuration Protocol
(DHCP) auto configuration function.
4. Click Hostname to display the Hostname tab.
44 Modifying the library configuration