HP StoreEver ESL G3 Tape Libraries - Manual (Page 108)

2. Display library data using either the Select Filter options or clicking on a particular module in
the Select Module section of the dialog box.
•
Using Select Filter, search for and display specific criteria according to device type and
location coordinates, or by Media ID.
◦ Select the DeviceType filter, then from the Type drop-down list click the appropriate
device type: Storage, I/E (I/E Station), or Drive. Click Show.
The Control Module dialog box displays a graphical view of the library elements
according to the Type selected.
◦ To search for a specific cartridge according to the barcode, select the Media ID filter,
type the barcode in the Media ID field, then click Show.
The Module dialog box displays the specific cartridge highlighted in red within the
module where it is located.
◦ To search for a specific cartridge according to the element address, select the Element
Address filter, type the element address in the field, then click Show. You must be in
partition view to filter using the Element Address.
•
In the Select Module area, select a specific module in the library to view. On a multi-module
library, all modules are represented.
108 Monitoring the library