HP StoreEver ESL G3 Tape Libraries - Manual (Page 244)

set partition
Description of Command Function
Sets the specified partition to the online or offline state.
Command Syntax
set partition online|offline [force]
path: /set/partition online|offline [force]
Command Parameters (Required)
Pn – The partition number is specified using a logical number, is 1-based.
Command Options
force – allows you to skip the confirmation prompt that would otherwise require you to enter “yes”
to confirm taking the partition offline, optional.
Examples
Result Command
Sets partition 1 to online (unless the robot is offline, for
example if the door is open) set partition online p1
Sets partition 2 to offline set partition offline p2
Set partition 2 to offline without a confirmation prompt set partition offline p2 force
/>set partition offline p1
Partition 'LL0' is going to be taken offline.
Changing the partition mode to offline will cause robotics actions against
this partition to fail, please ensure all backup applications are not
currently using this partition.
Enter 'y' to continue or 'n' to skip [default='n']: y
Setting logical partition 'LL0' offline!
/>set partition online p1 force
Setting logical partition 'LL0' online!
/>set partition offline p1 force
Setting logical partition 'LL0' offline!
/>set partition online p1
Partition 'LL0' is going to be taken back online.
Changing the partition mode to online will allow robotics actions against
this partition to complete, and inform the backup applications of any changes.
Enter 'y' to continue or 'n' to skip [default='n']: y
Setting logical partition 'LL0' online!
244 CLI Guide