HP StoreEver ESL G3 Tape Libraries - Manual (Page 151)

5. On Event List, click OK to display the events, if any.
6. Select an event to display in the Select Event area of the window, and then click Details.
7. On Event Details, click FRU Test to display the Verification Test window.
8. After the FRU test successfully verifies that the FRU has PASSED or is MARGINAL, all events
associated with the failure are transitioned to the Verify state.
Running custom tests
The custom tests allow you to run a sub-test that is normally part of the larger tests that call multiple
sub-tests, such as Installation or Partial tests.
Working with verification tests 151