HP StoreEver ESL G3 Tape Libraries - Manual (Page 201)

Table 39 Event Details window, Report tab (continued)
The key report represents the earliest time at which the
event reached its highest severity level. It often isolates the
most significant problem. An event in the Closed or Verified
state does not have a key report.
In the Report # area:
The library-assigned identifier for the report. Report ID
The date and time on which the library created the report. Posted
For open events only, the number of times that the library
created the same report. If the identical issue occurs while Duplicates
the event remains open, the library creates an identical
report and increments the report's duplicate count. If the
library has not created duplicate reports, the value is zero
(0).
The subsystem that caused the event. Possible subsystems
are: Status Group
• Connectivity
•
Drives
• Control
•
Power
•
Cooling
• Robotics
The severity level that is associated with the status group
(subsystem). Possible levels are: Severity
•
Failed
• Degraded
•
Warning
• Good
The identifier for the FRU. FRU ID
In libraries with multiple FRUs of the same kind, the specific
FRU that caused the report. This field usually identifies a FRU Instance
particular FRU by its location in the library (for example,
[1,1,1,8,1,1] for a drive sled). If the library has only one
instance of the FRU, this field is blank.
The category to which the FRU belongs. FRU Category
A brief explanation of why the FRU caused the report. Reason
A number that is associated with a particular issue that
caused the event report. Because more than one issue can Error Code
cause a report, an error code provides another level of
detail. The error code maps to a portion of library firmware
code, which a trained analyst can examine to determine
the root cause of an issue. This information is for technical
support use only.
A numerical qualifier, in hexadecimal format, that provides
context for an error condition. A modifier adds another Modifier
level of detail to what the error code provides. If a modifier
does not exist for the error condition, this field is set to 0x0.
This information is for technical support use only.
Viewing event details 201