HP StoreEver ESL G3 Tape Libraries - Manual (Page 78)

NOTE: If you are logging on to the library for the first time using the default administrator
account (admin), type admin for both the user name and password. After you log on, the
library prompts you to change the default admin password. You must enter and confirm a
new password. Passwords that are most secure include a combination of letters, numbers,
and non-alphanumeric characters. Passwords must be eight or more characters in length.
5. Click OK.
NOTE: After logging on, do not close the web browser window or use it to navigate to
another URL. Doing so will close the LMC applet but might leave the current session active.
Logging off from the LMC
To log off from the LMC:
1. Select Operations
→Log Off or select the Log Off button on the toolbar.
2. A message appears that asks you whether you are sure that you want to log off. Select Yes.
The ESL G3 Logon dialog box appears.
3. To close the LMC applet, click Cancel.
Connecting to multiple libraries
This feature allows you log in to multiple libraries, and switch from one library console to another
without logging off.
To connect to multiple libraries:
1. From the LMC menu, click Connection
→New.
The Connect to Library dialog box appears.
2. Type or select the library hostname or the library IP address, and click OK. You can use either
IPv4 or IPv6 addresses
Once you have connected to additional libraries, you can choose any of those libraries from
the Connection drop-down list.
NOTE: To log off when connected to multiple libraries, first select the library from the
Connection drop-down list and follow the instructions at “Logging off from the LMC” (page
78) . Repeat this process to log off from additional libraries.
Using the indicator panel and OCP
The library provides an indicator panel and an OCP, as shown in Figure 9 (page 79) .
78 Operating the library