E-mailing or saving the configuration record, E-mailing the configuration record, Saving the configuration record – HP StoreEver ESL G3 Tape Libraries User Manual
Page 126
If the operation fails at any point, the library generates an event that contains details about
the failure. Perform a revert or rescue to return the library to a stable configuration.
6.
If you have not already done so, make sure that the robotics are enabled and bring the library
back online so that data input and output can recommence.
E-mailing or saving the configuration record
Use the Email Configuration Record dialog box to:
•
Send the configuration record to a selected e-mail address. See
.
•
Save the configuration record to a specified .txt file. See
“Saving the configuration record”
.
Before you can e-mail the configuration record, the library e-mail account must be configured. For
information on configuring the library e-mail account, see
“Configuring e-mail” (page 51)
NOTE:
Only users with administrative privileges can e-mail or save the configuration record.
E-mailing the configuration record
To e-mail the configuration record:
1.
Log on as an administrator.
2.
From the menu bar, click Monitor
→Email Configuration Record.
The Email Configuration Record dialog box appears.
3.
Click Email and select or type in the destination e-mail address.
NOTE:
You can only specify one e-mail address. If you need to send the configuration record
to multiple destinations, repeat this procedure for each e-mail address.
4.
Use the Comment box to type any additional information you want to include in the e-mail
message.
5.
Click OK to send the configuration record and your comment text to the specified e-mail
address and close the Email Configuration Record dialog box.
The e-mail message includes both the configuration record information and your comments as
embedded text, with Library Configuration Information as the subject.
Saving the configuration record
To save the configuration record:
1.
Log on as an administrator.
2.
From the menu bar, click Monitor
→Email Configuration Record.
The Email Configuration Record dialog box appears.
126
Monitoring the library