HP StoreEver ESL G3 Tape Libraries - Manual (Page 133)

4. In the Drive(s) area, select the appropriate drive row.
5. Perform operations in the Control area of the window.
Table 32 (page 133) describes the elements on the Drives window.
Table 32 Drives window
Description Element
In the Drive(s) area:
Enables you to select the type of drives to list on the Drives
window (for example, LTO4 for LTO-4 tape drives). All lists
every drive in the library. Drive Type drop-down list
Indicates the state of the drive (Varied On or Varied Off). State
Indicates the type of drive (for example, LTO-5 - FC). Drive Type
Indicates the location of the drive by means of a coordinate
system. For information about location coordinates, see
“Understanding location coordinates” (page 88) .
Location
Indicates the status of the drive as reported by the event
system (for example, Good or Failed). Health
Indicates the World Wide Name of the drive. WWN
If a cartridge is loaded in the specified drive, displays the
barcode number of the cartridge. Barcode
Configuring and testing drives 133