HP Hitachi Dynamic Link Manager Software - Manual (Page 85)

3. Creating an HDLM Environment
63
Does not support the I/O fencing function.
#3
Does not support linkage with SFVS (Storage Foundation Volume Server).
#4
Does not support the following SVM functions:
• Multi-owner disksets
• Diskset import
• Automatic (top down) volume creation
#5
Does not support the EFI label.
#6
Does not support the following SVM functions:
• Handling disks whose capacity is 1 TB or more
• Multi-owner disksets
• Diskset import
• Automatic (top down) volume creation
#7
You must apply MP2 or later when using the I/O fencing function. The I/O
fencing function can be used only when Hitachi USP, Universal Storage Platform
V/VM, or Virtual Storage Platform storage systems are connected. Note that the
only supported service group type is the failover service group. The parallel
service group and hybrid service group are not supported.
#8
In a configuration that uses a driver other than the Sun Microsystems HBA driver
(other than the qlc or emlxs driver), the SVM shared diskset cannot use disks
managed by HDLM.
#9
Does not support ZFS.
#10
When the SVM shared diskset uses disks managed by HDLM in a configuration
that uses a driver other than the Sun Microsystems HBA driver (other than the qlc
or emlxs driver), use Sun Cluster device IDs (logical device files under
/dev/
did/dsk
). The SVM shared diskset cannot use HDLM logical device names.