HP Hitachi Dynamic Link Manager Software - Manual (Page 206)

3. Creating an HDLM Environment
184
9. Execute the
metaroot
command.
Use the
-R
option to specify the mount point of the
/
(
root
) file system after the
migration.
For example:
# metaroot -R /mnt0 d10
10. Reboot from the post-migration environment.
Figure 3-18: Booting from the post-migration environment shows the disk that
you will boot.
Figure 3-18: Booting from the post-migration environment
11. When the host starts, confirm that the swap device and dump device have been
correctly configured. Then, use the
mount
command to confirm that
/
(
root
) and
/usr
have been correctly configured.