HP Hitachi Dynamic Link Manager Software - Manual (Page 537)

8. Messages
515
8.5 KAPL05001 to KAPL06000
KAPL05003-I
The HDLM driver (filter component) was successfully attached to
Disk (
aa...aa
), Partition (
bb...bb
).
Details
The path for the disk and partition was registered successfully in the core logic.
aa...aa: minor number of the sd or ssd device (decimal number)
bb...bb: slice number
Action
None.
KAPL05008-E
Could not allocate memory. (
aa...aa
:
bb...bb
) Execute the DLMgetras
utility to collect error information, and then contact your
vendor or maintenance company. Refer to the HDLM User's Guide
for instructions how to execute the DLMgetras utility.
Details
The OS memory reservation function started but returned an error.
aa...aa: File ID, line number (hexadecimal number)
bb...bb: Target memory size (hexadecimal number)
Action
Check whether the HDLM driver has started normally. If it has not started or
contains an error, execute the
DLMgetras
utility for collecting HDLM error
information, and then contact your HDLM vendor or the maintenance company
if there is a maintenance contract for HDLM. For details on the
DLMgetras
utility, see 7.2 The DLMgetras Utility for Collecting HDLM Error Information.
KAPL05011-E
Could not attach the HDLM driver (filter component) to Disk
(
aa...aa
), Partition (
bb...bb
). (
cc...cc
:
dd...dd
) Execute the DLMgetras
utility to collect error information, and then contact your
vendor or maintenance company. Refer to the HDLM User's Guide
for instructions how to execute the DLMgetras utility.
Details
An attempt to register the path for the disk and partition into the core logic has
failed.