HP Hitachi Dynamic Link Manager Software - Manual (Page 145)

3. Creating an HDLM Environment
123
DynamicLinkManager
directory exists. If the
/var/opt/
DynamicLinkManager
directory exists, execute the following command to
delete it:
# rm -rf /var/opt/DynamicLinkManager
14. Execute the following command to check whether HDLM 6.5.1 has been installed
successfully.
Make sure that
VERSION
appears as
06.5.1.0000
.
# pkginfo -l DLManager
PKGINST: DLManager
NAME: Dynamic Link Manager
CATEGORY: system
ARCH: sparc
VERSION:
xx.x.x.xxxx
BASEDIR: /
VENDOR:
...
#
15. Make sure that the logical device file of the sd or ssd device is backed up.
After you execute the
dlmsetconf
utility for creating the HDLM driver
configuration definition file in the next step(s) (either step 16, or steps 16 and 17)
and restart the node with the reconfiguration option specified, the logical device
files for the sd or ssd devices to be managed by HDLM will be deleted. Before
you execute the
dlmsetconf
utility and restart the node, confirm that these files
have been backed up. For details on how to back up files, see (1) Performing
Operations on Devices to Be Managed by HDLM in 3.5.1 Preparations for a
New Installation of HDLM.
16. Execute the following
dlmsetconf
utility to create the HDLM driver
configuration definition file (
kernel/drv/dlmfdrv.conf
) and the HDLM
driver unconfiguration definition file (
/opt/DynamicLinkManager/config/
dlmfdrv.unconf
).
# /opt/DynamicLinkManager/bin/dlmsetconf
Type
y
in response to the KAPL10242-I message displayed when you execute the
dlmsetconf
utility.
Information associated with LUs that access a physical path is defined in the
HDLM driver configuration definition file (
/kernel/drv/dlmfdrv.conf
).
Do not edit this file.