HP Hitachi Dynamic Link Manager Software User Manual
Page 542

8. Messages
520
The instance number of the HDLM filter driver instance that you tried to attach is
already being used.
aa...aa: Instance number (decimal number)
Action
Contact the HDLM vendor, or the maintenance company if you have a
maintenance contract for HDLM.
KAPL05412-W
An attempt to allocate a bus address for the HDLM device instance
aa...aa
failed. The HDLM device could not be attached.
Details
An attempt to assign a physical path name (device address) to the HDLM filter
driver instance that you tried to attach has failed.
aa...aa: Instance number (decimal number)
Action
Execute the
dlmsetconf
utility for creating the HDLM driver configuration
definition file, and then reboot.
KAPL05436-E
Failed to attach the HDLM Nexus device. Instance =
aa...aa
. Execute
the DLMgetras utility to collect error information, and then
contact your vendor or maintenance company. Refer to the HDLM
User's Guide for instructions how to execute the DLMgetras
utility.
Details
An attempt to attach the HDLM Nexus driver instance failed.
aa...aa: instance number (decimal number)
Action
Contact your HDLM vendor or the maintenance company if there is a
maintenance contract for HDLM.
KAPL05437-E
The contents of the configuration definition file
aa...aa
.conf are
invalid. Check whether the path is correctly connected to the
disk. Execute the dlmsetconf command and reboot. Refer to the
HDLM User's Guide for instructions how to execute the dlmsetconf
command.
Details
An entry in a configuration definition file
(/kernel/drv/dlmfdrv.conf
or
/